Today we will be fixing the charging port on an iPhone X. Somehow, someone managed to break the pins and this is how I fixed it.
Required tools-
Tri-point – Y000
Phillips – PH000 (or JIS – J000)
Pentalobe – P2
iPhone Standoff Bit (not required, makes the job easier)
Flat blade of some sort
Heat
Patience.
Toolkit that works for this repair (affiliate link) –
Toolkit that I recommend and reviewed (affiliate link) – https://amzn.to/2EqCvvv
Toolkit that is closest to the one I use for all my repairs (affiliate link) – https://amzn.to/2H4duIr
Part can be found here (affiliate links)
Black – https://amzn.to/3b3RKv0
White – https://amzn.to/2X2IQWu
The glue that I recommend using (I use the B6000 at 50ml, but B7000/E6000 work as well) (affiliate link) – https://amzn.to/2GY2cVL
Clamps I recommend with the glue (affiliate link) – https://amzn.to/2T8opHn
Dual Temperature Heating “Thing” (Heat “Gum”) (affiliate link) – https://amzn.to/3hzTUUs
The best type of razor blades (buy 100+ cause they’re low cost and fragile[don’t pry with these!!!]) (affiliate link) – https://amzn.to/2YE4W17
Playing Cards for easy adhesive cutting (affiliate link) – https://amzn.to/2JTBJf6
What else should I replace? Want more iPhone X videos? Let me know on here or on Twitter https://twitter.com/mattofrwr.