Wired
Apple is preparing to launch four iPhone 13 models in the autumn conference in September. There is also a lot of news that this year’s bangs will be reduced, 120Hz high-brush screen, mainly the iPhone 13 camera lens will be significantly improved, foreign Innocent Store accessories manufacturers also launched the iPhone ahead of schedule 13 Protective case, lens protector, and screen protector. With these accessories, you can know the details of the iPhone 13 lens and bangs in advance.
New improvements to the iPhone 13 camera lens
Apple is already preparing to switch to new camera lens modules for the new generation of iPhone 13 mini, iPhone 13, iPhone 13 Pro and iPhone 13 Pro Max. From the iPhone 13 protective case provided by Innocent Store accessories, it can be determined that the four lens modules will be large Last lap.
In the iPhone 13 and iPhone 13 mini, the diagonal diameter of the lens module will increase by 3.9 cm, which is 0.19 cm longer than the previous generation iPhone 12 and iPhone 12 mini (diameter 3.71 cm).
As for the iPhone 13 Pro series of lens modules, the changes are more obvious, all upgraded to 4.49 cm, which is larger than the previous generation iPhone 12 Pro with a frame diameter of 3.71 cm and iPhone 12 Pro Max with a frame diameter of 4 cm. You can also see the iPhone 13 Pro The difference between the size of the lens module and the iPhone 13 Pro Max is the most obvious.
In addition, foreign websites also compare the size of the iPhone 13, iPhone 13 mini and iPhone 13 Pro series lens stickers. From the data, it can be seen that the lens size is also much larger than the old iPhone 12 series, and the lens size will be 0.2mm larger. 0.38mm will also cause the iPhone 12 lens sticker to not be used.
The size of the lens has become larger, mainly because Apple has equipped four iPhone 13 with new lenses. The use of large apertures, more lenses, and a displacement optical image stabilization system (Sensor Shift) will lead to the need for the iPhone 13 mini and iPhone 13 lenses. It is arranged diagonally, and the iPhone 13 Pro series maintains the original three-lens arrangement, only the size of the lens module is changed.
In addition, the size of the rear lens module of the 6.1-inch iPhone 13 Pro case has become larger, causing the 6.1-inch iPhone 13 lens module to be different. As a result, the iPhone 13 and iPhone 13 Pro cases cannot be shared. This also means that four iPhone 13 models are required. Purchase the corresponding protective cases separately.
Button position and thickness change
The position of the buttons on the left and right sides of the iPhone 13 protective case has also changed significantly. Whether it is the side power button, volume button and mute button, all move down about 6.2mm. The advantage is that users with shorter fingers can press better.
This will cause the iPhone 13 button position to be adjusted, mainly because the lens module becomes larger, causing the entire button position to be adjusted downwards.
In the thickness part, use the iPhone 13 Pro and iPhone 12 Pro protective cases to compare the thickness with each other. The difference between the two models is 1 mm, which means that the thickness of the iPhone 13 Pro series will become thicker. The main reason is that the iPhone 13 battery is fully enlarged. The fuselage is also thicker!
The bangs are narrowed and the front lens position is changed
In addition to the iPhone 13 protective shell and lens protector that can see the lens changes, the iPhone 13 protective sticker is also exposed in advance. If you compare it with the iPhone 12 bangs, you can see that the iPhone 13 bangs have changed narrower.
The main reason is that Apple moved the microphone in the bangs area of Face ID to the edge of the top fuselage. The width of the bangs was reduced from 3.45 cm to 2.57 cm, and the left and right sides were narrowed by about 0.88 cm, allowing the visual range of the left and right sides of the iPhone to be changed. Big.
In addition, from the comparison map of the iPhone 13 protector, it can be clearly seen that the front lens has also been changed to the far left, which is obviously different from the previous series of iPhone 12 models on the right.
A few days ago, Jon Prosser, a foreign Apple exposé, revealed an improved version of the Face ID prototype accessories. The overall Face ID design is exactly the same as the hole and notch of the iPhone 13 protector that came out earlier. The front camera lens is arranged on the far left. It seems to be able to confirm that Apple is preparing to support the unlocking of masks for the iPhone 13.
The 2021 Apple Autumn Conference will start in September, and Mr. Mad is currently estimated to be held on September 14th. Rumor has it that the launch date of the new iPhone 13 will be on September 17th. As for AIrPods 3, it will be on September 30th. On sale.
More news from Apple’s press conference
Image Source:svetapple
If you like the teaching of this article, I would like to learn more about Apple information, iPhone and Mac hidden 3C techniques in the follow-up, welcome to follow up Mr. Crazy FB Fan Group,Telegram,MeWe,Instagramas well as Subscribe to YouTube channel, There will be more practical skills teaching to share with everyone.