Cameron Sino
Click “Show more” to see the entire description.
0:26 Step 1 – Remove the SIM tray
0:33 Step 2 – Loosen these screws
0:43 Step 3 – Separate the display unit using a suction cup
1:14 Step 4 – Loosen these screws and remove the battery plug bracket
1:20 Step 5 – Unplug the battery
1:26 Step 6 – Loosen these screws
1:35 Step 7 – Remove display cable bracket and unplug connectors
1:58 Step 8 – Unplug the camera
2:04 Step 9 – Loosen these screws and remove the camera
2:13 Step 10 – Remove this camera ring
2:18 Step 11 – Loosen these screws and remove connector bracket
2:25 Step 12 – Loosen these screws and remove the antenna unit
2:37 Step 13 – Unplug these connectors
2:55 Step 14 – Loosen this screw and remove NFC bracket
3:01 Step 15 – Loosen these screws
3:12 Step 16 – Remove the logic board
3:21 Step 17 – Loosen these screws and remove taptic engine
3:32 Step 18 – Remove adhesive strip and the original battery
4:01 Step 19 – Loosen this screw and remove the flash bracket
4:08 Step 20 – Lift up the flash unit
4:16 Step 21 – Loosen these screws
4:28 Step 22 – Lift up the microphone unit
4:39 Step 23 – Remove the cable assembly
4:52 Step 24 – Remove volume button covers
5:00 Step 25 – Remove the power button cover
5:05 Step 26 – Loosen these screws and remove the speaker unit
5:19 Step 27 – Loosen these screws and remove lighting assembly
5:57 Step 28 – Remove the lightning and speaker bracket
6:15 Step 29 – Loosen screws and remove display unit holding clips
6:33 Step 30 – Disassembly finished, switch to Cameron Sino case
6:37 Step 31 – Install lighting and speaker bracket
7:08 Step 32 – Install display unit holding clips
7:49 Step 33 – Put the lighting assembly in place
8:13 Step 34 – Install the microphone the bracket and tighten the screws
8:35 Step 35 – Install the speaker unit
9:00 Step 36 – Put the power and volume button covers in place
9:09 Step 37 – Install the cable assembly
9:37 Step 38 – Install flash and microphone unit
10:00 Step 39 – Apply adhesive tape on the Cameron Sino battery
11:27 Step 40 – Install taptic engine
11:35 Step 41 – Put the logic board in place and tighten these screws
12:11 Step 42 – Install the plastic clip and the NFC bracket
12:39 Step 43 – Plug the antenna cable
12:50 Step 44 – Plug the lighting connector and the audio control cable
13:09 Step 45 – Install the antenna unit
13:23 Step 46 – Remove the camera lens cover from the original case
12:31 Step 47 – Plug and install the camera unit
12:51 Step 48 – Apply adhesive and install the camera lens cover
14:49 Step 49 – Plug the display unit connectors
15:13 Step 50 – Install display unit cables bracket
15:25 Step 51 – Plug the battery connector and install the bracket
15:38 Step 52 – Install the display unit and tighten screws
This is the battery for mobile, smartphone model Apple iPhone 6s
View detailed descriptions here:
Battery model: CS-IPH611EX
Capacity: 4400mAh / 16.72Wh
Volts: 3.80V
Dimension: 138.30 x 67.10 x 10.00mm
Warranty: 12 Months
Difficulty: ★★★★☆
Do you want more video with different devices? Comment us downstairs and tell us which model you want.
To know more Cameron Sino. Please follow our social media below!
Website: http://www.cameronsino.com
Facebook: https://www.facebook.com/cameronsino/
Twitter: https://twitter.com/CameronSino
Instagram: https://www.instagram.com/CAMERONSINO/ .