in

iPhone 6 Screen Replacement



In this video we demonstrate how to replace an iPhone 6 screen assembly. Because it is not broken we will won’t replace it but instead re-install the original screen. Replacement parts are available

Fortunately you can open the iPhone 6 with a plastic pry tool. Using a metal tool like the iSesamo can easily scar your phones frame which doesn’t look nice and also makes it very obvious that your phone has been opened before thus voiding any manufacturers warranty that you might have had.

Facebook https://www.facebook.com/GoCellPhoneRepair
Twitter https://twitter.com/fixmycellphone

Share this:

20 Comments

  1. when i am reassembling the four display cables in the top right, two of them will not connect. this results in my phone not being able to power on during the test run. Any advice?

  2. hello, so I have recently had troubles with my screen having white lines in it after going on a run today, I didn't drop it but I feel like a loosen the 3rd cable doing so, today I opened up the phone and disconnected all 4 cables in the upper righthand  corner. after putting them in properly (hearing the click) I went to check my phone, now the whole thing is black and will not turn on period. I say in your video at about 13:3413:37 you are pressing on something so I took off the plate that is guarding that. and just pressed everything that you might have. does anyone have any suggestions or help?

  3. +Go Cell Phone Repair will those new screens are good quality?? I bought one before from ebay and the screen pop up in the side in few weeks please let me know so i can get them if they are good quality thanks great video

  4. Awesome! This video was super helpful and allowed me to successfully install a new LCD digitizer replacement screen that I purchased off of amazon for $95.

    Thanks Again!
    Cheers!
    – Rob

  5. The old screen don't work I can't see any thing on old screen and I fix phone for people I am a repair man I have change so many Lcd of iPhone 6 and all the the same problem after changing the Lcd the fingers password don't work in all of them may be because the password is saved in the memory and as we disconnect the cable from the memory it stop reading it back!!

  6. My all the cables are perfect but still as I go to setting to setup figure password it don't allow me to do. It don't come on it stays off all time.

  7. why is it important to unplug the battery first? i thought turning the phone off was just fine. If you were to power it on during repair whats the potential risk to the phone?

  8. If the clear plastic camera and proximity sensor holders are important when reassembling the screen, why can't I find any replacement screens that come with the plastic holders? What should I do if I get a screen that doesn't have them already installed?