in Industry

How to Install a Tempered Glass Screen Protector on your Phone

1.9k Views 42 Comments



This video will show you how to install a tempered glass screen protector on your smart phone (Iphone or android).

Share this:

42 Comments

  4. Very helpful video.
    Some suggestions:
    – As you lower the protector, push 3 spread fingers from your spare hand against its hinged edge. This prevents the edge of the protector from raising slightly and shifting. With this technique, there is no need to use a stickier tape. The provided sticky tabs work well if you do this.
    – When making minor adjustments, the provided sticky tabs are easier to adjust than very sticky tape.
    – Before removing the protective film, practise the folding technique repeatedly, until you are certain that you are doing it correctly.

  7. Thank you so much as long as I have been using tempered glass I always messed it up for the sheer fact that I had no idea what the guide stickers were for and finally this time my tempered glass is on without dust spots inside and aligned perfectly! Thank you for this video!!!

  8. Nice one! That's a good trick with the tape-hinge. They don't do it in the phone stores, so I never would have thought of it… just would have dropped the glass and hoped. 🤣

  14. Finally had to find a vid after fighting the remaining protector I have to not have all these weird dirt specks under it. It makes me so mad. Broke down and ordered more. Better study up for the big test!

    The hinge is genius. Can’t believe I didn’t think of that in the battle of the screen protector today.

  19. Very helpful to encourage people to do it by themselves. I had change mine at the mobile store the price with 5 times more expensive than the real price of the glass screen. Thank you for the clear demonstration without wasting time.

  23. Thank you! I thought I had destroyed my last screen protector when I removed it to get a speck of dirt off. Washing it and drying with a hair dryer worked! ❤

  26. I have just put mine on by following the process. In a few seconds it sticks automatically perfectly without any bubble. One more tip – I folded a bit of the edge of the tape so that it's easier to remove from the protector.

  32. First time putting one on…no telling what sort of cluster-jumble I would have accomplished w/o your video.
    In the end, it came out perfect!
    Thanks!

  34. Awesome advice just bought a really nice promotional cell phone bad thing is there's no accessories available yet other then what come with the phone so only one screen saver most don't get it right the first time including myself however your video helped me ace it the first time and no bubbles either . Thanks my friend

  36. How well should these fit the screen? The one i bought has the right make/model on the label but just lining it up, its a good 4mm narrower than the phone screen which is disappointing since it was £20 for the case and glass.

  40. Perhaps masking tape e.g. the blue 3 M painters' tape would work better for the "hinges"? I know some of the screen protector companies supply a model specific plastic frame to ensure proper alignment of the SP and phone screen. I just used one with on my Galaxy S8, and it was the least troublesome installation I've had and no bubbles whatsoever.